What to use for shower pan?

What is a Shower Pan

What to use for shower pan?

A shower pan is a type of flooring that sits just above the subfloor and directly underneath the tile. This is where you will place your tiling and finishing materials. A custom shower pan can be built in many different ways, but there are a few things to consider before starting your project. This article will go over some tips on how to build a custom shower pan and what material you should use when making one. This content is presented by https://accurehome.com/

What is a Shower Pan

A shower pan is a waterproof tray that sits below the base of your shower. It’s used to prevent water from leaking through the floor and into your home. If you’re remodeling your bathroom and building a new shower, you may want to consider installing one temporarily while you finish the rest of your bathroom remodel project. They are also used for enclosures and can be made out of concrete, fiberglass or plastic. Explore now: How to move out of a toxic home

If you decide that it would be more convenient to install a permanent pan during construction rather than waiting until after everything else has been completed, there are several factors that will affect how much money it costs:

  • The size of the space available – A larger space means fewer labor hours because there’s more room for workers’ equipment and materials; however, it also takes up more material (concrete).
  • How many anchors need to go into place before pouring concrete – The more anchors needed for stability purposes (i.e., drywall ceiling support), then more time will be spent on getting these items ready before pouring concrete over them. However, this may not increase overall cost if additional labor hours are saved elsewhere during construction process due economizing those tasks by working concurrently with others.

What to use for shower pan?

If you’re ready to take on the task of installing a shower pan, there are a few different types of materials that can be used. Concrete is the most common choice for this job because it costs less than tile, has a long-life span, and is easy to work with. You’ll want to use mortar between concrete slabs and sealant in all joints between walls and floors. Tile backer board is also an option; however, it may be more difficult to install with proper grouting techniques when compared to other surfaces such as glass block or acrylic laminate (Showerpans).

Another popular choice among DIY-ers is tile itself—preferably ceramic due to its durability and easy maintenance qualities. If using tile directly on top of your subflooring rather than installing it over backer board first (which provides extra insulation), then make sure there’s plenty of space between each piece so they don’t crack under pressure from water pressure during showers or baths (HomeAdvisor). Glass block can also provide insulation but comes with additional maintenance issues since it tends not last as long as other materials due largely because heat causes them to break down quicker than other materials like metal frames would (HGTV). Lastly, consider using an acrylic Shower Pan Liner instead if you’re concerned about high traffic areas getting worn out quickly enough from prolonged exposure; these liners have been specifically designed so they won’t crack even after years’ worth of use!

Custom Shower Pans – How to Build Your Own

You can save money by building your own custom shower pan. You’ll need a waterproof membrane and the right tools to install it, but once you have those, it’s fairly simple.

If you want to build your own custom shower pan, here are the steps:

  • Lay down plastic sheeting or a tarp over the subfloor underneath your bathtub. Place an additional layer of plastic on top of this if there is water damage in any area under your tub or around its base (this will help keep moisture out).
  • Pour concrete into the bottom of your bathtub up until about one inch below where it would normally be filled with water when using standard fixtures such as a bathtub faucet and drain plug fixture (if you’re building this for a single bathroom installation). Make sure that there are no imperfections in this layer so that moisture cannot enter through any crack or hole; this will cause mold growth underneath layers later on!

DIY Shower Pan Installation – Instructions and Tips

Shower pans can be made of a variety of materials, including concrete and fiberglass. It is important to choose the material that best suits your budget and needs. You may want to consider installing a DIY shower pan if you are on a tight budget or trying to save money. To install this type of shower pan, follow these steps:

  • Use a trowel to apply mortar evenly over the bottom of the pan. Apply in 1/8-inch increments so that it does not come out too thick or thin throughout application process (this step will ensure consistent consistency).
  • Level off with a level if needed before applying mortar to wall surface where it will sit when installed (you can use an adjustable level). Make sure that bottom edge is as close as possible without being flush against wall surface so you don’t end up with water seeping under it later on down road when using your newly built shower!
  • Brush some more mortar onto sides using brush provided along side with each purchase from Amazon link below – just make sure everything stays nice and level before laying down any tile design!

Things to consider

  • The size of your shower pan is important. You want to make sure that it can fit in the space you have available, and that it will be large enough to support your shower drain and flange without any problems.
  • The size of the drain opening for your shower pan will also be an important factor in determining if a particular model is right for you. If you don’t have enough room for one of these drains, then the model may not work with your setup and bathroom design.
  • You should also look at other factors before deciding on a particular model or brand such as height, weight capacity and ease of installation. These things are all important when choosing which type would work best in each individual situation!

What Mortar to Use for Shower Pan?

The mortar you use to install a shower pan must be waterproof and resist mold, mildew and bacteria. It should also have the strength to withstand the weight of the shower pan and withstand the water pressure of your shower. Generally speaking, you should use mortar that is specifically made for installing a shower pan.


To sum things up, a shower pan is a waterproof base for your shower. It can be made of tile or fiberglass, but it’s important to know what material you want before purchasing the right one. The right type of mortar will also help make sure that your shower pan lasts as long as possible!

No Comments

Sorry, the comment form is closed at this time.